PLANET WNAP-1120 - Manual (Page 28)

PIN (as Registrar) setup step:
1. Select Config Mode: “Registrar” on WNAP-1120.
2. Fill the PIN code of the other device (as Enrollee that support WPS-PIN setting) into the “configure via
Client Pin code” of WNAP-1120.
3. Click the PIN buttons on WNAP-1120 and the other device in 2 minutes.
4. If you see the wireless client in the list, WPS-PIN setting is successful.
PIN (as Enrollee) setup step:
1. Select Config Mode: “Enrollee” on WNAP-1120.
2. Fill the PIN code of WNAP-1120 into the other device (as Registrar).
3. Click the PIN buttons on WNAP-1120 and the other device in 2 minutes.
4. If you see the wireless client in the list, WPS-PIN setting is successful.
** As the figure as above, just change two roles.
28