PLANET WNAP-1120 - Manual (Page 21)

You may press “Refresh” to get the new client table or “Close” to close this dialog
box.
MAC Address 1 ~4 If you want to bridge multiple WNAP-1120 in this mode, you have to enter the MAC
addresses of other WNAP-1120 into the fields.
Set Security IF you want to enable security to protect your wireless connection. Please press
“Set Security” button and refer to section “3.2.7 Security setting for bridge mode” to
configure the detail settings.
After configuration complete, please click “Apply” button to save the configuration. Then you will
see a screen to prompt you the settings are saving successfully. You may press “Continue” for
configure other settings or “Apply” to restart WNAP-1120 with new configuration.
21