PLANET WNAP-1120 - Manual (Page 24)

3.2.7 Security setting of bridge mode
In “AP Bridge-Point to Point mode”, “AP Bridge-Point to Multi-Point mode” and “AP Bridge-WDS
mode”, you can click “Set Security” to add encryption for the communication between the
bridged access points. This can protect your wireless network.
Parameter Description
Encryption You can select “None”,“WEP 64bits”, “WEP 128bits”, “WPA (TKIP)” or “WPA2
(AES)” of this option . It is set to “None” by default.
Key Format This is only used when you select “WEP 64bits” or “WEP 128bits” encryption
method. You may select to select ASCII Characters (alphanumeric format) or
Hexadecimal Digits (in the “A-F”, “a-f” and “0-9” range) to be the WEP Key.
WEP Key This is only used when you select “WEP 64bits” or “WEP 128bits” encryption
method. The WEP key is used to encrypt data transmitted between the bridged
access points. Fill the text box by following the rules below.
64-bit WEP: input 10-digit Hex values (in the “A-F”, “a-f” and “0-9” range) or 5-digit
ASCII character as the encryption keys.
128-bit WEP: input 26-digit Hex values (in the “A-F”, “a-f” and “0-9” range) or
10-digit ASCII characters as the encryption keys.
Pre-shared Key
Format
This is only used when “WPA” or “WPA2” is selected. You may use Passphrase
(alphanumeric format) or Hexadecimal Digits (in the “A-F”, “a-f” and “0-9” range) to
be the Pre-shared Key.
24