PLANET WNAP-1120 - Manual (Page 18)

2.4GHz (N): It forces the WNAP-1120 to operate in 802.11n only.
2.4GHz (B+G): It allows the WNAP-1120 to operate in 802.11b and 802.11g
simultaneously.
2.4GHz (B+G+N): It allows the WNAP-1120 to operate in 802.11b, 802.11g, and
802.11n simultaneously.
Channel Number Select the appropriate channel from the list provided to correspond with your
network settings. Channels differ from country to country.
Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
MAC Address 1 Keep default setting: WNAP-1120 will use its own MAC address to access the
wireless LAN.
Press “MAC Clone” button: It will use PC’s MAC address to access the
wireless LAN.
Set Security IF you want to enable security to protect your wireless connection. Please press
“Set Security” button and refer to section “3.2.8 Security setting for bridge mode”
to configure the detail settings.
After configuration complete, please click “Apply” button to save the configuration. Then you will
see a screen to prompt you the settings are saving successfully. You may press “Continue” for
configure other settings or “Apply” to restart WNAP-1120 with new configuration.
3.2.4 AP Bridge - Point to Multipoint Mode
This function allows WNAP-1120 to bridge more than 2 wired Ethernet networks together by
wireless connection.
18