PLANET WNAP-1120 - Manual (Page 20)

Parameter Description
Mode Shows the current operation mode.
Band 2.4GHz (B): It forces the WNAP-1120 to operate in 802.11b only.
2.4GHz (G): It forces the WNAP-1120 to operate in 802.11g only.
2.4GHz (N): It forces the WNAP-1120 to operate in 802.11n only.
2.4GHz (B+G): It allows the WNAP-1120 to operate in 802.11b and 802.11g
simultaneously.
2.4GHz (B+G+N): It allows the WNAP-1120 to operate in 802.11b, 802.11g, and
802.11n simultaneously.
ESSID The ESSID (up to 32 printable ASCII characters) is the unique name identified in a
WLAN. The ID prevents the unintentional merging of two co-located WLANs.
Please make sure that the ESSID of all stations in the same WLAN network are the
same. The default value is “default”.
Channel Number Select the appropriate channel from the list provided to correspond with your
network settings. Channels differ from country to country.
Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
Associated Clients You may press “Show Active Clients” button to check the connected client
information. After the button pressed, you will see the dialog box as below:
20