PLANET IGS-10020HPT - Manual (Page 95)

User’s Manual of IGS-10020HPT
。 After the “Factory” button be pressed and rebooted, the system will be loaded default settings, except IP address.
To reset the Industrial Managed Switch to the Factory default setting, you can also press the hardware
reset button at the front panel about 5 seconds. After the device be rebooted. All configuration will be
loaded to default setting include IP address. You can login the management WEB interface within the
same subnet of 192.168.0.xx.
4.2.25 System Reboot
The Reboot page enables the device to be rebooted from a remote location. Once the Reboot button is pressed, user will
re-access the WEB interface about 60 seconds later, the System Reboot screen in Figure 4-2-36 appears.
Figure 4-2-36: System Reboot Page Screenshot
Buttons
: Click to reboot the system.
: Click to return to the web main page without reboot the system.
95