PLANET IGS-10020HPT - Manual (Page 34)

User’s Manual of IGS-10020HPT
■ Reset Button
At the left of front panel, the reset button is designed for reboot the Industrial Managed Switch without turn off and on the
power, also can reset the Industrial Managed Switch to factory default mode.
Figure 2-2: Reset button of Industrial Managed Switch
1. Press the RESET button once. The Industrial Managed Switch will reboot automatically.
2. Press the RESET button for 5 seconds. The Industrial Managed Switch will back to the factory
default mode; the entire configuration will be erased.
2.1.3 LED Indicators
 System
LED Color Function
P1 Green Lights to indicate that the Switch has power.
P2 Green Lights to indicate that the Switch has power.
Fault Green Lights to indicate that the Power failure
Ring* Green Lights to indicate that the ERPS Ring has been created successfully.
R.O.* Green Lights to indicate that Switch has been enabled Ring Owner.
* = feature future
34