PLANET IGS-10020HPT User Manual
Page 47
User’s Manual of IGS-10020HPT
MGB-LA10
SFP-Port 1000Base-LX (WDM,TX:1310nm) mini-GBIC module-10km
MGB-LB10
SFP-Port 1000Base-LX (WDM,TX:1550nm) mini-GBIC module-10km
MGB-LA20
SFP-Port 1000Base-LX (WDM,TX:1310nm) mini-GBIC module-20km
MGB-LB20
SFP-Port 1000Base-LX (WDM,TX:1550nm) mini-GBIC module-20km
MGB-LA40
SFP-Port 1000Base-LX (WDM,TX:1310nm) mini-GBIC module-40km
MGB-LB40
SFP-Port 1000Base-LX (WDM,TX:1550nm) mini-GBIC module-40km
MGB-TSX
SFP-Port 1000Base-SX mini-GBIC module - 550m (-40~75 Degree C)
MGB-TLX
SFP-Port 1000Base-LX mini-GBIC module - 10km (-40~75 Degree C)
MGB-TL30
SFP-Port 1000Base-LX mini-GBIC module - 30km (-40~75 Degree C)
MGB-TL70
SFP-Port 1000Base-LX mini-GBIC module - 70km (-40~75 Degree C)
Fast Ethernet SFP Transceiver Modules
MFB-FX
SFP-Port 100Base-FX Transceiver (1310nm)-2km
MFB-F20
SFP-Port 100Base-FX Transceiver (1310nm)-20km
MFB-F40
SFP-Port 100Base-FX Transceiver (1310nm)-40km
MFB-F60
SFP-Port 100Base-FX Transceiver (1310nm)-60km
MFB-FA20
SFP-Port 100Base-BX Transceiver (WDM,TX:1310nm)-20km
MFB-FB20
SFP-Port 100Base-BX Transceiver (WDM,TX:1550nm)-20km
MFB-TFX
SFP-Port 100Base-FX Transceiver (1310nm) -2km (-40~75 Degree C)
MFB-TF20
SFP-Port 100Base-FX Transceiver (1310nm) - 20km (-40~75 Degree C)
1. It recommends using PLANET SFPs on the Industrial Managed Switch. If you insert a SFP
transceiver that is not supported, the Industrial Managed Switch will not recognize it.
2. Please choose the SFP transceiver which can be operated under -40~75 Degree C
temperature if the switch device is working on over 0~50 Degree C temperature
environment.
1000Base-SX/LX:
Before connect the other switches, workstation or Media Converter.
1.
Make sure both side of the SFP transceiver are with the same media type, for example: 1000Base-SX to 1000Base-SX,
1000Bas-LX to 1000Base-LX.
2.
Check the fiber-optic cable type match the SFP transceiver model.
To connect to 1000Base-SX SFP transceiver, use the Multi-mode fiber cable- with one side must be male duplex LC
connector type.
To connect to 1000Base-LX SFP transceiver, use the Single-mode fiber cable-with one side must be male duplex LC
47