PLANET IGS-10020HPT - Manual (Page 478)

User’s Manual of IGS-10020HPT
STP Port Mode
Description:
Set or show the STP enabling for a port.
Syntax:
STP Port Mode [] [enable|disable]
Parameters:
: Port list or 'all'. Port zero means aggregations.
Enable : Enable MSTP protocol
Disable : Disable MSTP protocol
Default:
disable
Example:
Enable STP function on port1
IGS-10020HPT:/>stp port mode 1 enable
STP Port Edge
Description:
Set or show the STP adminEdge port parameter.
Syntax:
STP Port Edge [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
Enable : Configure MSTP adminEdge to Edge
Disable : Configure MSTP adminEdge to Non-edge
Default:
disable
Example:
Enable STP edge function on port1
478