PLANET IGS-10020HPT - Manual (Page 201)

User’s Manual of IGS-10020HPT
 Port Shaper Rate Controls the rate for the port shaper. The default value is 500. This value is
restricted to 100-1000000 when the "Unit" is "kbps", and it is restricted to
1-3300 when the "Unit" is "Mbps".

Port Shaper Unit Controls the unit of measure for the port shaper rate as "kbps" or "Mbps". The
default value is "kbps".
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to undo any changes made locally and return to the previous page.
4.9.4 Port Classification
This page allows you to configure the basic QoS Ingress Classification settings for all switch ports. The Port Classification
screen in Figure 4-9-4 appears.
Figure 4-9-4 : QoS Ingress Port Classification Page Screenshot
The page includes the following fields:
Object Description
 Port The port number for which the configuration below applies.
 QoS Class The Configuration All with available values will assign to whole ports.
201