PLANET IGS-10020HPT - Manual (Page 52)

User’s Manual of IGS-10020HPT
3.3 CLI Mode Management
There are two ways fot CLI mode management, one is remote telnet, another one is operated from console port. Remote telnet
is an IP-based protocol, console port is for user opaerate IGS-10020HPT on locol only, however their operation are the same.
The command line user interface is for performing system administration, such as displaying statistics or changing option
settings. Using this method, you can access the Industrial Managed Switch remote telnet interface from personal computer, or
workstation in the same Ethernet environment. As long as you know the current IP address of the Industrial Managed Switch.
Figure 3-1: Remote Telnet and Console Port Interface Management
In Windows system, you may click “Start” then choose “Acessories”and “Command Prompt”, please input “telnet
192.168.0.100” and press “enter’ from your keyboard. You will see the following screen appears Figure 3-2.
52