PLANET IGS-10020HPT - Manual (Page 25)

User’s Manual of IGS-10020HPT
25
Management Protocol (SNMP) and can be managed via any standard-based management software. For text-based
management, the IGS-10020HPT can be accessed via Telnet and the console port. Moreover, the IGS-10020HPT offers secure
remote management by supporting SNMPv3 connection which encrypts the packet content at each session.
Powerful Security
PLANET IGS-10020HPT offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge.
It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or
defined typical network applications. Its protection mechanism also comprises of 802.1x port-based and MAC-based user and
device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user
privacy. The network administrators can now construct highly secured corporate networks with considerably less time and effort
than before.
Flexibility and Extension Solution
The two mini-GBIC slots built in the IGS-10020HPT support Dual-Speed, 100Base-FX and 1000Base-SX/LX SFP (Small
Form-factor Pluggable) fiber-optic modules, that means, the administrator now can flexibly choose the suitable SFP transceiver
according to not only the transmission distance but also the transmission speed required. The distance can be extended from
550 meters (Multi-Mode fiber) up to above 10/50/70/120 kilometers (Single-Mode fiber or WDM fiber). They are well suited for
applications within the enterprise data centers and distributions.
1.3 How to Use This Manual
This User Manual is structured as follows:
Section 2 , INSTALLATION
The section explains the functions of the Industrial Managed Switch and how to physically install the Industrial
Managed Switch .
Section 3 , SWITCH MANAGEMENT
The section contains the information about the software function of the Industrial Managed Switch.
Section 4 , WEB CONFIGURATION
The section explains how to manage the Industrial Managed Switch by Web interface.
Section 5 , COMMAND LINE INTERFACE
The section describes how to use the Command Line interface (CLI).
Section 6 , CLI MODE
The section explains how to manage the Industrial Managed Switch by Command Line interface.
Section 7 , SWITCH OPERATION
The chapter explains how to does the switch operation of the Industrial Managed Switch.
Section 8 , TROUBLESHOOTING
The chapter explains how to trouble shooting of the Industrial Managed Switch.
Appendix A
The section contains cable information of the Industrial Managed Switch.
Appendix B
The section contains Glossary information of the Industrial Managed Switch.