PLANET IGS-10020HPT - Manual (Page 226)

User’s Manual of IGS-10020HPT
226
 Port Redirect Indicates the ingress port of the ACE. Possible values are:

All: The ACE will match all ingress port.

Port: The ACE will match a specific ingress port.
 Mirror Specify the mirror operation of this port. Frames matching the ACE are mirrored
to the destination mirror port. The allowed values are:

Enabled: Frames received on the port are mirrored.

Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".
 Counter The counter indicates the number of times the ACE was hit by a frame.
 Modification Buttons You can modify each ACE (Access Control Entry) in the table using the following
buttons:
: Inserts a new ACE before the current row.
: Edits the ACE row.
: Moves the ACE up the list.
: Moves the ACE down the list.
: Deletes the ACE.
: The lowest plus sign adds a new entry at the bottom of the ACE listings.
Buttons
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediate
: Click to clear the counters.
: Click to remove all ACEs.