PLANET IGS-10020HPT - Manual (Page 90)

User’s Manual of IGS-10020HPT
Buttons
: Click to upgrade firmware.
DO NOT Power OFF the Industrial Managed Switch until the update progress is complete.
Do not quit the Firmware Upgrade page without press the “OK” button - after the image be
loaded. Or the system won’t apply the new firmware. User has to repeat the firmware
upgrade processes again.
4.2.21 Configuration Backup
This function allows backup and reload the current configuration of the Industrial Managed Switch to the local management
station. The Configuration Backup screen in Figure 4-2-25 appears.
Figure 4-2-25: Configuration Save Page Screenshot
Save configuration except IP Address feature is almost the same with Save configuration, except the IP address will not be
saved.
You can save/view or load the switch configuration. The configuration file is in XML format with a hierarchy of tags:
Header tags: and . These tags are mandatory and must be present
at the beginning of the file.
Section tags: , and . The platform section must be the first section tag and
this section must include the correct platform ID and version. The global section is optional
and includes configuration which is not related to specific switch ports. The switch section is
optional and includes configuration which is related to specific switch ports.
Module tags: , , etc. These tags identify a module controlling specific parts of the
configuration.
Group tags: , etc. These tags identify a group of parameters, typically a table.
Parameter tags: , etc. These tags identify parameters for the specific section, module and
group. The tag is used for table entries.
Configuration parameters are represented as attribute values. When saving the configuration from the switch, the entire
90