4 port statistics – PLANET WGSW-2620HP User Manual
Page 62
User’s Manual of WGSW-2620HP
4.3.4 Port Statistics
The following chart provides the current statistic information which displays the real-time packet transfer status for each port.
The user might use the information to plan and implement the network, or check and find the problem when the collision or
heavy traffic occurs.
Figure 4-3-4:
Port Statistics Interface Screenshot
The page includes the following fields:
Object
Description
Port:
The port number.
State:
It’s set by Port Control. When the state is disabled, the port will not transmit or
receive any packet.
Link:
The status of linking—‘Up’ or ‘Down’.
Tx Good Packet:
The counts of transmitting good packets via this port.
Tx Bad Packet:
The counts of transmitting bad packets (including undersize [less than 64 octets],
oversize, CRC Align errors, fragments and jabbers packets) via this port.
Rx Good Packet:
The counts of receiving good packets via this port.
Rx Bad Packet:
The counts of receiving good packets (including undersize [less than 64 octets],
oversize, CRC error, fragments and jabbers) via this port.
Tx Abort Packet:
The aborted packet while transmitting.
Packet Collision:
The counts of collision packet.
Packet Dropped:
The counts of dropped packet.
Reset:
To clear current per port counters.
62