PLANET WGSW-2620HP - Manual (Page 116)

User’s Manual of WGSW-2620HP
116
The page includes the following fields:
„ IPv4 ACL
Object Description Default Vaule
Group ID 1 ~ 200
Action Permit / Deny.
„ Permit: Permit packet cross switch.
„ Deny: Drop packet.
Permit
VLAN Any / VID.
„ Any: Any VLAN id.
„ VID: 1~4094. A certain VLAN id.
Any
Packet Type IPv4 / Non-IPv4 / Binding
„ IPv4: Set Ipv4 packet field.
„ Non-IPv4: Set non-Ipv4 packet field.
„ Binding: Set binding entry.
IPv4
Src IP Address Set this field if Packet Type is IPv4, else ignore.
Any / IP and Mask
„ Any: Any IP address.
„ IP: A certain IP address.
Mask: ***.***.***.***
* is represent a digit from 0~9,
*** is range from 0 to 255
Notice: This is not subnet mask.
Any
Dst IP Address Set this field if Packet Type is IPv4, else ignore.
Any / IP and Mask
„ Any: Any IP address.
„ IP: A certain IP address.
Mask: ***.***.***.***
* is represent a digit from 0~9,
*** is range from 0 to 255
Any
IP Fragment Set this field if Packet Type is IPv4, else ignore.
Uncheck / Check
„ Uncheck: Not check IP fragment field.
„ Check: Check IP fragment field.
Uncheck
L4 Protocol Set this field if Packet Type is IPv4, else ignore.
Any / ICMP(1) / IGMP(2) / TCP(6) / UDP(17)
Any
Protocol Set this field if Packet Type is IPv4, else ignore.
0~255.
If protocol not find in L4 Protocol field, you can direct assign
number.