3 reboot switch, 4 reset to default, 5 tftp update firmware – PLANET WGSW-2620HP User Manual

Page 162

User’s Manual of WGSW-2620HP

dhcp

Description:

Set switch as dhcp client, it can get ip from dhcp server.

If you set this command, the switch will reboot.

show dhcp

Description:

show dhcp enable/disable.

6.7.3 Reboot switch

boot

Description:

Reboot (warm-start) the switch.

6.7.4 Reset to Default

erase startup-config

Description:

Reset configurations to default factory settings at next boot time.

6.7.5 TFTP Update Firmware

copy tftp firmware

Description:

Download firmware from TFTP server.

Syntax:

copy tftp firmware

<ip-addr> <remote-file>

Parameters:

<ip-addr> specifies the IP address of the TFTP server.

<remote-file> specifies the file to be downloaded from the TFTP server.

162