PLANET WGSW-2620HP - Manual (Page 22)

User’s Manual of WGSW-2620HP
2.2.3 Installing the SFP transceiver
The sections describe how to insert an SFP transceiver into an SFP slot.
The SFP transceivers are hot-pluggable and hot-swappable. You can plug-in and out the transceiver to/from any SFP port
without having to power down the Managed Switch. As the Figure 2-7 appears.
Figure 2-7: Plug-in the SFP transceiver
Approved PLANET SFP Transceivers
PLANET Managed switch supports both single mode and multi mode SFP transceiver. The following list of approved
PLANET SFP transceivers is correct at the time of publication:
1000Base-SX/LX SFP transceiver:
PLANET SFP Module List
Model Interface Speed Fiber connector and distance
Operating
Temperature
MGB-GT 1000Base-T 1000Mbps RJ-45 – 100m 0℃~50℃
MGB-SX 1000Base-SX 1000Mbps LC, Multi-Mode (850nm) -220m/550m 0℃~50℃
MGB-SX2 1000Base-SX 1000Mbps LC, Multi-Mode (1310nm) -2km 0℃~50℃
MGB-LX 1000Base-LX 1000Mbps LC, Single Mode (1310nm) – 10km 0℃~50℃
MGB-L30 1000Base-LX 1000Mbps LC, Single Mode (1310nm) – 30km 0℃~50℃
MGB-L50 1000Base-LX 1000Mbps LC, Single Mode (1310nm) – 50km 0℃~50℃
MGB-L70 1000Base-LX 1000Mbps LC, Single Mode (1550nm) – 70km 0℃~50℃
MGB-L120 1000Base-LX 1000Mbps LC, Single Mode (1550nm) – 120km 0℃~50℃
It recommends using PLANET SFPs on the Switch. If you insert a SFP transceiver that is
not supported, the Managed Switch will not recognize it.
22