PLANET WGSW-2620HP - Manual (Page 160)

User’s Manual of WGSW-2620HP
160
„ Unicast/Multicast : Flood unicast/multicast filter
„ Control Packets : Control packets filter
„ IP multicast : IP multicast packets filter
„ Broadcast Packets : Broadcast Packets filter
Syntax:
broadcast select <unicast/multicast | control packet | ip multicast | broadcast >
Collision-Retry
Description:
Collision-Retry setting
Syntax:
Collision-Retry < off | 16 | 32 | 48 >
Parameters:
16\32\48 – In Half-Duplex, collision-retry maximum is 16\32\48 times and packet will be dropped if collisions still happen
Disable – In Half-Duplex, if happen collision will retry forever (Default).
6.7 Administration Configuration
6.7.1 Change Username / Password
hostname
Description:
Set switch name.
Syntax:
hostname <name-str>
Parameters:
<name-str> specifies the switch name. If you would like to have spaces within the name, use quotes (“”) around the
name.
no hostname
Reset the switch name to factory default setting.
[no] password
Description:
Set or remove username and password for manager or operator.
Syntax:
[no] password