PLANET WGSW-2620HP - Manual (Page 17)

User’s Manual of WGSW-2620HP
■ Reset button
At the left of front panel, the reset button is designed for reboot the Managed Switch without turn off and on the power.
The following is the summary table of Reset button functions :
Reset Button Pressed and Released Function
About 5 seconds Reboot the Managed Switch.
About 10 seconds
Reset the Managed Switch to Factory Default configuration.
The Managed Switch will then reboot and load the default
settings as below:
。 Default Password: admin
。 Default IP address: 192.168.0.100
。 Subnet mask: 255.255.255.0
。 Default Gateway: 192.168.0.254
2.1.2 LED Indications
The front panel LEDs indicates instant status of port links, data activity and system power; helps monitor and troubleshoot
when needed.
WGSW-2620HP LED indication
Figure 2-2: WGSW-2620HP LED Panel
„ System
LED Color Function
PWR Green Lights to indicate that the Switch has power.
SYS Green Lights to indicate the system is working.
„ Alert
LED Color Function
PWR Alert Green Lights to indicate that the PoE power supply failure.
FAN1 Green Lights to indicate that the FAN1 failure.
FAN2 Green Lights to indicate that the FAN2 failure.
FAN3 Green Lights to indicate that the FAN3 failure.
17