PLANET WGSW-2620HP - Manual (Page 40)

User’s Manual of WGSW-2620HP
40
The page includes the following fields:
Object Description
DHCP
Enable or disable the DHCP client function.
When DHCP function is enabled, the Managed Switch will be assigned an IP
address from the network DHCP server. The default IP address will be replaced
by the assigned IP address on DHCP server. After the user clicks Apply, a
popup dialog shows up to inform the user that when the DHCP client is enabled,
the current IP will lose and user should find the new IP on the DHCP server.
IP Address
Assign the IP address that the network is using.
If DHCP client function is enabled, this switch is configured as a DHCP client.
The network DHCP server will assign the IP address to the switch and display it
in this column.
The default IP is 192.168.0.100 or the user has to assign an IP address
manually when DHCP Client is disabled.
Subnet Mask
Assign the subnet mask to the IP address.
If DHCP client function is disabled, the user has to assign the subnet mask in
this column field.
Gateway
Assign the network gateway for the switch.
If DHCP client function is disabled, the user has to assign the gateway in this
column field.
The default gateway is 192.168.0.254.