PLANET WGSW-2620HP - Manual (Page 198)

User’s Manual of WGSW-2620HP
198
6.18.4 Configure PoE -- Port
poe enable
Description:
Enabling or disabling the port POE injects function.
Command Level:
Global Configuration
Syntax:
poe enable [<port-list>]
[no] poe enable [<port-list>]
Parameters:
<port-list> specifies the ports to be set. If not entered, all ports are set.
Example:
Switch (config)# poe enable 1
Switch(config)# show poe status 1
Port Admin Oper
Power
mode
Priority Power Limit[W]
Current
Consumption [W]
Current[mA] Device Class
Port1 Enable on 802.3at Low 30.8 0 0 0
Switch(config)# no poe enable 1
Switch(config)# show poe status 1
Port Admin Oper
Power
mode
Priority Power Limit[W]
Current
Consumption [W]
Current[mA] Device Class
Port1 Disable on 802.3at Low 30.8 0 0 0