PLANET WGSW-2620HP - Manual (Page 49)

User’s Manual of WGSW-2620HP
4.2.4.8 SNMP V3 usm-user
Configure SNMPv3 users table on this page. The entry index keys are Engine ID and User Name. The SNMPv3 Users
Configuration screen in Figure 4-2-12 appears.
Figure 4-2-12: SNMP Configuration Interface Screenshot
The page includes the following fields:
Object Description
SNMP User Name:
A string identifying the user name that this entry should belong to. The allowed
string length is 1 to 15.
Auth Type:
Indicates the authentication protocol that this entry should belong to. Possible
authentication protocol are:
• None : None authentication protocol.
• MD5 : An optional flag to indicate that this user using MD5 authentication
protocol.
The value of security level cannot be modified if entry already exist. That means
must first ensure that the value is set correctly.
Auth Key(8~32):
A string identifying the authentication pass phrase.
For MD5 authentication protocol, the allowed string length is 8 to 32.
Private Key(8~32):
A string identifying the privacy pass phrase.
The allowed string length is 8 to 32.
Remove Check to delete the selected entry. It will be deleted during the next save.
49