PLANET WGSW-2620HP - Manual (Page 14)

User’s Manual of WGSW-2620HP
14
1.5 Product Specification
Product
WGSW-2620HP
24-Port 10/100Mbps + 2 Gigabit TP / SFP Managed 802.3at PoE Switch
Hardware Specification
10/100Mbps Copper Ports 24 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports
1000Mbps Copper Ports 2 10/100/1000Mbps RJ-45 Auto-MDI/MDI-X ports
SFP/mini-GBIC Slots 2 1000Base-SX/LX/BX, shared with Port-25~Port-26
Switch Architecture Store-and-Forward
Switch Fabric 8.8Gbps / non-blocking
Switch Throughput 6.547Mpps @64Bytes
Address Table 8K entries
Share Data Buffer 512Kbytes
Flash 4MB
DRAM 32MB
Maximum Frame Size 9K Bytes
Flow Control
Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
LED
Power, PoE Power, FAN Alert
Link/Activity (Green)
PoE In-Use (Amber)
1000 LNK / ACT(Green)
10/100 LNK / ACT(Green)
Dimensions ( W x D x H) 440 x 300 x 44.5mm, 1U height
Weight 4.6kg
Power Requirement 100 - 240VAC, 50 - 60Hz, Auto-sensing.
Power Consumption
System: 110V: 29 Watts / 98BTU, 220V: 31 Watts / 105BTU
Ethernet Full Loading: 110V: 34 Watts / 116BTU, 220V: 35 Watts / 119BTU
PoE Full Loading: 110V: 360 Watts / 1228BTU, 220V: 360 Watts / 1228BTU
Operating Temperature 0°C ~ 50°C Degree C
Operating Humidity 10% ~ 95% (non-condensing)
Storage Temperature -20°C ~ 70 Degree C
Storage Humidity 10% ~ 95% (non-condensing)
Reset Button
< 5 sec: System reboot
> 10 sec: Factory Default
Power over Ethernet
PoE Standard IEEE 802.3af / IEEE 802.3at Power over Ethernet / PSE
PoE Power Supply Type End-Span
PoE Power Output
Per Port 52V DC, 350mA . Max.15.4 Watts (IEEE 802.3af)
Per Port 52V DC, 590mA. Max. 30 Watts (IEEE 802.3at)
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget 360 Watts (Port 1 to port 12: 180 Watts, port 13 to port 24: 180 Watts)
Max. number of Class 1 PD 24
Max. number of Class 2 PD 24
Max. number of Class 3 PD 24
Max. number of Class 0, 4 PD 11
Layer 2 Function
Management Interface Console, Telnet, Web Browser, SSL, SNMPv1, v2c, v3
Port Configuration
Port disable/enable
Auto-negotiation
10/100/1000Mbps full and half duplex mode selection
Flow Control disable / enable
Port Status Display each port’s speed duplex mode, link status and Flow control status.