PLANET WGSW-2620HP - Manual (Page 138)

User’s Manual of WGSW-2620HP
138
The page includes the following fields:
Object Description
System PoE Admin Mode
Allows user enable or disable PoE function. It will causes all of PoE ports
supply or not supply power.
PoE PSU Status
Display current PoE power supply working status.
PoE Temperature Unit 1
Display the current operating temperature of PoE chip unit 1.
The unit 1 is in charge of PoE Port-1~Port-12
PoE Temperature Unit 2
Display the current operating temperature of PoE chip unit 2.
The unit 1 is in charge of PoE Port-13~Port-24
Temperature Threshold Allows setting over temperature protection threshold value. It system
temperature was over it then system lower total PoE power budget
automatically.
Over Temperature Protection Enabled to prevent system too hot to damage. When POE unit temperature
rise and over Temperature Threshold value, PoE power budget will be reduced
20 watts when the temperature raised 3 Degree C each time, and PoE power
budget will going down 60 watts maximum.
For example, 360 watts is default PoE power budget and Temperature
Threshold is 50 Degree C. PoE temperature raise is going to cause PoE
Power budget changing as follow.
PoE Unit Temperature PoE Power Budget
50 360 watts
51 340 watts
54 320 watts
57 300 watts
Power limit mode Allow to configure power limit mode of Web Smart Device. It can choose :
„ Consumption Detect the real power from the PDs.
„ Classification Deliver PoE power by port priority setting and device
PoE power level.
PoE Usage Threshold Allows setting how much PoE power budget could be limited.
Power Allocation Show the total watts usage of PoE Switch.
PoE Function Can enable or disable the PoE function.
Power Mode Displays per port PoE operate status, 802.3af or 802.3at.