PLANET WGSD-10020 - Manual (Page 67)

User’s Manual of WGSD-10020 Series
67
4.2.14 LED Power Reduction
The LEDs power consumption can be reduced by lowering the LEDs intensity. LEDs intensity could for example be lowered
during night time, or they could be turn completely off. It is possible to configure 24 different hours of the day, at where the LEDs
intensity should be set. The LED Power Reduction screen in Figure 4-2-17 appears.
Figure 4-2-17 LED Power Reduction page screenshot
The page includes the following fields:
Object Description
• Time
The time at which the LEDs intensity shall be set.
• Intensity The LEDs intensity (100% = Full power, 0% = LED off).
• Maintenance Time
When a network administrator does maintenance of the switch (e.g. adding or
moving users) he might want to have full LED intensity during the maintenance
period. Therefore it is possible to specify that the LEDs shall use full intensity a
specific period of time.
Maintenance Time is the number of seconds that the
LEDs will have full intensity after either a port has changed link state, or the LED
pushbutton has been pushed.
Buttons
: Click to add time.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.