PLANET WGSD-10020 - Manual (Page 171)

User’s Manual of WGSD-10020 Series
171
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the MLD SSM Information Table.
The MLDv2 Information screen in Figure 4-8-16 appears.
Figure 4-8-16 MLD SSM Information page screenshot
The page includes the following fields:
Object Description
• VLAN ID
VLAN ID of the group.
• Group
Group address of the group displayed.
• Port
Switch port number.
• Mode
Indicates the filtering mode maintained per (VLAN ID, port number, Group
Address) basis. It can be either Include or Exclude.
• Source Address IP Address of the source. Currently, system limits the total number of IP source
addresses for filtering to be 128.
• Type
Indicates the Type. It can be either Allow or Deny.
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.
: Updates the table, starting with the first entry in the IGMP Group Table.
: Updates the table, starting with the entry after the last entry currently displayed.
4.8.14 MVR
In multicast VLAN networks, subscribers to a multicast group can exist in more than one VLAN. If the VLAN boundary
restrictions in a network consist of Layer 2 switches
Multicast VLAN Registration (MVR) is a protocol for Layer 2 (IP)-networks that enables multicast-traffic from a source VLAN
to be shared with subscriber-VLANs. The alternative would be to use PIM or a similar protocol to route the traffic through a