PLANET WGSD-10020 - Manual (Page 248)

User’s Manual of WGSD-10020 Series
248
up and running, and the RADIUS module is ready to
accept access attempts.
Dead (X seconds left): Access attempts were made
to this server, but it did not reply within the configured
timeout. The server has temporarily been disabled,
but will get re-enabled when the dead-time expires.
The number of seconds left before this occurs is
displayed in parentheses. This state is only reachable
when more than one server is enabled.
Round-Trip
Time
radiusAuthClient
ExtRoundTripTim
e
The time interval (measured in milliseconds) between
the most recent Access-Reply/Access-Challenge and
the Access-Request that matched it from the RADIUS
authentication server. The granularity of this
measurement is 100 ms. A value of 0 ms indicates
that there hasn't been round-trip communication with
the server yet.
RADIUS Accounting Servers
The statistics map closely to those specified in RFC4670 - RADIUS Accounting Client MIB.
Use the server select box to switch between the backend servers to show details for.
Object Description
• Packet Counters RADIUS accounting server packet counter. There are five receive and four transmit
counters.
Direction Name RFC4670 Name Description
Rx
Responses
radiusAccClientExt
Responses
The number of RADIUS
packets (valid or invalid)
received from the server.
Rx
Malformed
Responses
radiusAccClientExt
MalformedRespons
es
The number of malformed
RADIUS packets received
from the server. Malformed
packets include packets with
an invalid length. Bad
authenticators or or unknown
types are not included as
malformed access responses.