PLANET WGSD-10020 - Manual (Page 307)

User’s Manual of WGSD-10020 Series
307
In this mode the
Maximum Power fields have no effect.
 Allocation mode
In this mode the user allocates the amount of power that each port may reserve. The allocated/reserved power for each
port/PD is specified in the Maximum Power fields. The ports are shut down when total reserved powered exceeds the
amount of power that the power supply can deliver.
In this mode the port power is not turned on if the PD requests more power the available.
 Consumption mode
In this mode the ports are shut down when the actual power consumption for all ports exceeds the amount of power that the
power supply can deliver or if the actual power consumption for a given port exceeds the reserved power for that port. The
ports are shut down according to the ports priority. If two ports have the same priority the port with the highest port number
is shut down.
 Priority mode
In this mode the user assign the priority to the ports/PD. When the total PoE power consumption request is over the allowed
power supply limitation, the system shut down PoE ports by port priority setting.
Ethernet Port Configuration
This section allows the user to inspect and configure the current PoE port settings , screen in Figure 4-16-2 appears.
Figure 4-16-2 PoE Configuration screenshot