beautypg.com

PLANET WGSD-10020 User Manual

Page 113

background image

User’s Manual of WGSD-10020 Series

113

QinQ tunneling is used to maintain customer-specific VLAN and Layer 2 protocol configurations even when different customers

use the same internal VLAN IDs. This is accomplished by inserting

Service Provider VLAN (SPVLAN) tags into the customer’s

frames when they enter the service provider’s network, and then stripping the tags when the frames leave the network.

A service provider’s customers may have specific requirements for their internal VLAN IDs and number of VLANs supported.

VLAN ranges required by different customers in the same service-provider network might easily overlap, and traffic passing

through the infrastructure might be mixed. Assigning a unique range of VLAN IDs to each customer would restrict customer

configurations, require intensive processing of VLAN mapping tables, and could easily exceed the maximum VLAN limit of

4096.

The Managed Switch supports multiple VLAN tags and can therefore be used in MAN applications as a provider bridge,

aggregating traffic from numerous independent customer LANs into the

MAN (Metro Access Network) space. One of the

purposes of the provider bridge is to recognize and use VLAN tags so that the VLANs in the MAN space can be used

independent of the customers’ VLANs. This is accomplished by adding a VLAN tag with a MAN-related VID for frames entering

the MAN. When leaving the MAN, the tag is stripped and the original VLAN tag with the customer-related VID is again available.

This provides a tunneling mechanism to connect remote costumer VLANs through a common MAN space without interfering

with the VLAN tags. All tags use EtherType

0x8100 or 0x88A8, where 0x8100 is used for customer tags and 0x88A8 are used

for service provider tags.

In cases where a given service VLAN only has two member ports on the switch, the learning can be disabled for the particular

VLAN and can therefore rely on flooding as the forwarding mechanism between the two ports. This way, the MAC table

requirements is reduced.





This manual is related to the following products: