PLANET WGSD-10020 - Manual (Page 485)

User’s Manual of WGSD-10020 Series
485
Example:
Enable DSCP ingress translation on all port.
WGSD-10020HP:/>
qos Port DSCP Translation 1-10 enable
QoS Port DSCP Classification
Description:
Set or show DSCP classification based on QoS class and DP level.
This enables per port to map new DSCP value based on QoS class and DP level.
Syntax:
QoS Port DSCP Classification [] [none|zero|selected|all]
Parameters:
: Port list or 'all', default: All ports
none : No DSCP ingress classification
zero : Classify DSCP if DSCP = 0
selected : Classify DSCP for which class. mode is 'enable'
all : Classify all DSCP
(default: Show port DSCP ingress classification mode)
Default Setting:
none
Example:
Set DSCP classification based on QoS class and DP level in zero
WGSD-10020HP:/>
QoS Port DSCP Classification 1-10 zero
QoS Port DSCP EgressRemark
Description:
Set or show the port DSCP remarking mode.
Syntax:
QoS Port DSCP EgressRemark [] [disable|enable|remap_dp_unaware|remap_dp_aware]
Parameters:
: Port list or 'all', default: All ports