PLANET WGSD-10020 User Manual
Page 284
User’s Manual of WGSD-10020 Series
284
•
Mode
Select LLDP mode.
Rx only The switch will not send out LLDP information, but LLDP information
from neighbor units is analyzed.
Tx only The switch will drop LLDP information received from neighbors, but will
send out LLDP information.
Disabled The switch will not send out LLDP information, and will drop LLDP
information received from neighbors.
Enabled The switch will send out LLDP information, and will analyze LLDP
information received from neighbors.
•
Port Descr
Optional TLV: When checked the "port description" is included in LLDP
information transmitted.
•
Sys Name
Optional TLV: When checked the "system name" is included in LLDP information
transmitted.
•
Sys Descr
Optional TLV: When checked the "system description" is included in LLDP
information transmitted.
•
Sys Capa
Optional TLV: When checked the "system capability" is included in LLDP
information transmitted.
The system capabilities identifies the primary function(s) of the system and
whether or not these primary functions are enabled. The information advertised
by this TLV is described in IEEE 802.1AB.
•
Mgmt Addr
Optional TLV: When checked the "management address" is included in LLDP
information transmitted.
The management address protocol packet includes the IPv4 address of the
switch. If no management address is available, the address should be the MAC
address for the CPU or for the port sending this advertisement. The management
address TLV may also include information about the specific interface associated
with this address, and an object identifier indicating the type of hardware
component or protocol entity associated with this address
Buttons
: Click to save changes.
:
Click to undo any changes made locally and revert to previously saved values.