PLANET VC-810S - Manual (Page 45)

User’s Manual of VC-810S / VC-810S48
45
forwarded by an untagging port will have no 802.1Q VLAN information. (Remember that the PVID is only used
internally within the Switch). Untagging is used to send packets from an 802.1Q-compliant network device to a
non-compliant network device.
Frame Income
Frame Leave
Income Frame is tagged Income Frame is untagged
Leave port is tagged Frame remains tagged
Tag is inserted
(Tag=PVID or Original VID be remained)
Leave port is untagged Tag is removed
Frame remain untagged
(Tag=PVID be removed)
4.4.2 VLAN Membership
This function group individual ports into a small “Virtual” network of their own to be independent of the other ports. The
screen in Figure 4-18 appears.
Figure 4-18 VLAN Membership screen
The page includes the following items:
Object Description
• VLAN The VLAN entry index. Use the pull-down menu to specify the VLAN group for
VLAN member ports configure. The Switch supports up to 32 active VLAN groups.
• VID Specify the VLAN Identifier for the 802.1Q VLAN, the available range of the VID is
(1 to 4094). ( 802.1Q mode only)
• Member Port Select the physical interface for which you want to add or remove from the specify
VLAN group. Checked the Member box to select the members for the VLAN group.
Number 1-9 is the Physical interface ID of the VDSL2 Switch.
; ADD: To add selected ports to the specify VLAN group.
Remove: Remove the selected ports from the specify VLAN Group.
After setup completed, please press “Save” to take affect.