PLANET VC-810S - Manual (Page 32)

User’s Manual of VC-810S / VC-810S48
32
4.2.7 System Reboot
The Reboot page enables the device to be rebooted from a remote location. Once the Reboot button is pressed, user
have to re-login the WEB interface about 60 seconds later, the screen in Figure 4-11 appears.
Figure 4-11 System Reboot screen
You can also check the SYS LED at the front panel to identify the System is load completely or not. If the SYS LED is
blinking, then it is in the firmware load stage; if the SYS LED light on, you can use the WEB browser to login the VDSL2
Switch.
4.2.8 SNMP Management
The SNMP is a Protocol that governs the transceiver of information between management and agent. The VDSL2 Switch
supports SNMP Trap for event alarm, such as interface link up and link down. You also can define a name, location, and
contact person for the VDSL2 Switch. Fill in the system options data, and then click Save to update the changes.
Trap Manager
A trap manager is a management station (SNMP application) that receives traps (the system alerts generated by the
switch), the system alerts generated by the VDSL2 Switch. If no trap manager is defined, no traps will issue. Create a trap
manager by entering the IP address of the station.
Figure 4-12 SNMP Management screenshot