PLANET VC-810S - Manual (Page 42)

User’s Manual of VC-810S / VC-810S48
42
„ Port-Based VLAN
By setting the VLAN Type with Port-Based, Port-Based VLAN is enabled and 802.1Q VLAN tagging is ignored. The VLAN
group classification of an incoming packet on a Port-Based VLAN is defined by the port PVID (Port VLAN Identifier). The
Switch uses the PVID to search the VLAN table for the VLAN member.
Figure 4-16 VLAN Type – Port-Based VLAN screen
While Port-Based VLAN mode is selected, the displayed page includes the following configurable data:
Object Description
VLAN Type There’re three VLAN mode support – 802.1Q VLAN, Port-Based VLAN and No
VLAN.
• 802.1Q – Packets income will be tagged with VID as the PVID setting. All ports
on the switch belong to default VLAN (VID 1).
• Port-Base - Packets can only be broadcast among other members of the
same VLAN group. Note all unselected ports are treated as belonging to the
default system VLAN.
• No VLAN - Forbidden ports are not included in the VLAN.
If Port-based VLAN are enabled, then VLAN-tagging feature is ignored.
Port Select the physical interface for which you want to display or configure data.
PVID Allow assign PVID for selected port. The range for the PVID is 1-32.
A Port-Based VLAN Switch uses the PVID to search the VLAN table for the VLAN
member.