PLANET VC-810S - Manual (Page 11)

User’s Manual of VC-810S / VC-810S48
11
■ Reset button
At the left of front panel, the reset button is designed for reboot the VDSL2 Switch without turn off and on the power.
Figure 2-2 Reset button of VC-810S / VC-810S48
The following is the summary table of Reset button functions :
Reset Button Pressed and Released Function
About 1 second Reboot the VDSL2 Switch.
Until the SYS LED lit off
Reset the VDSL2 Switch to Factory Default configuration.
The VDSL2 Switch will then reboot and load the default IP.
settings as below:
。
Default Password: admin
。 Default IP address: 192.168.0.100
。 Subnet mask: 255.255.255.0
。 Default Gateway: 192.168.0.254
To press the RESET button about 10 seconds and then release. The VDSL2 Switch will back to
the factory default mode. Be sure that you backup the current configuration of VDSL2 Switch;
else the entire configuration will be erased when pressing the “RESET” button.
2.1.2 LED Indicators
The front panel LEDs indicates instant status of port links, data activity, system operation and system power, helps
monitor and troubleshoot when needed.
Figure 2-3 PLANET VC-810S / VC-810S48 LED panel