PLANET VC-810S User Manual
Page 30
User’s Manual of VC-810S / VC-810S48
30
Figure 4-8 Firmware Upgrade pop-up message
4. Click
“OK”, the VDSL2 Switch will start the TFTP upgrade procedure.
5. Please check your TFTP server application to confirm the TFTP file is well transmit to the VDSL2 Switch.
6. The VDSL2 Switch will reboot then, and It will cost 2 to 3 minutes for the TFTP firmware upgrade and reboot
procedure. Please wait for the process complete.
7. Once the new software is loaded to the system successfully, the Login screen appears. Enter the user name and
password to login the VDSL2 Switch.
Figure 4-9 Login screen
DO NOT Power OFF
the VDSL2 Switch until the update progress is complete.
Do not quit the Firmware Upgrade page without press the “OK” button - after the image is
loaded. Or the system won’t apply the new firmware. User has to repeat the firmware
upgrade processes again.