Avago Technologies MegaRAID SAS 8204ELP - Manual (Page 65)

MegaRAID SAS RAID Controller Family 3-15
Copyright © 2005-2007 by LSI Logic Corporation. All rights reserved.
J10 Write pending
indication LED 2-pin
connector The connector for the enclosure
LED. When lit, the LED indicates
that the on-board cache contains
data and a write from the cache to
the hard drives is pending. Optional.
J11 Ports 0–3 x4 SAS
ports A SAS 4i connector that connects to
physical drives and expanders.
J12 GND connector 1-pin
connector Reserved for LSI Logic internal use.
J15 Keyed I
2
C connector 4-pin
connector
Provides support for enclosure
management.
Reserved for LSI Logic internal use.
J18 SMBUS header for
enclosure
management 3-pin
header Provides support for enclosure
management. Reserved for LSI
Logic internal use.
Table 3.6 SAS 8408E RAID Controller – Jumpers and
Connectors (Cont.)
Jumper Description Type Comments