Avago Technologies MegaRAID SAS 8204ELP User Manual
Page 47
SAS Device Cables
2-11
Copyright © 2005-2007 by LSI Logic Corporation. All rights reserved.
2.4.2
Connecting the SAS RAID Controller with Internal Connectors to
Physical Disks and Expanders
shows how to connect the internal SAS cable from the SAS
RAID controller that has internal connectors to SAS and SATA II physical
disks or expander boards.
Follow these steps to connect a SAS RAID controller with internal
connectors directly to SAS physical disks, SATA II physical disks, or both.
Step 1.
Plug the 7-wire connector on the internal cable into the internal
connector on a SAS RAID controller.
Step 2.
Plug the connector on the other end of the internal cable into
the connector on a SAS physical disk, a SATA II physical disk,
or both.
Step 3.
If you have another physical disk, connect it to another plug on
the internal cable.
You can connect other devices if the cable has more
connectors.
- MegaRAID SAS 8204ELP (Channel) MegaRAID SAS 8204XLP MegaRAID SAS 8204XLP (Channel) MegaRAID SAS 8208ELP MegaRAID SAS 8208ELP (Channel) MegaRAID SAS 8208XLP MegaRAID SAS 8208XLP (Channel) MegaRAID SAS 8300XLP MegaRAID SAS 8308ELP MegaRAID SAS 8344ELP MegaRAID SAS 84016E MegaRAID SAS 84016E (Channel) MegaRAID SAS 8408E MegaRAID SAS 8480E MegaRAID SAS 8704ELP (Channel) MegaRAID SAS 8704EM2 MegaRAID SAS 8704EM2 (Channel) MegaRAID SAS 8708ELP (Channel) MegaRAID SAS 8708EM2 MegaRAID SAS 8708EM2 (Channel)