Enterasys Networks Enterasys Platinum Distributed Forwarding Engine 7G4285-49 - Manual (Page 75)

DFE-Platinum Series Hardware Installation Guide B-1
B
Mode Switch Settings and Option Installations
This appendix covers the following items:
Required Tools
Use the following tools to perform the procedures provided in this appendix:
• Antistatic wrist strap
• Phillips screwdriver
For information about... Refer to page...
Required Tools B-1
Setting the Mode Switches B-2
Memory Locations and Replacement Procedures B-3
Gaining Access to Memory Modules B-5
Caution: An antistatic wrist strap is required to perform the procedures in this appendix.
Use the antistatic wrist strap shipped with chassis when performing any of the procedures
in this appendix to minimize ESD damage to the devices involved.
Precaución: Para llevar a cabo los procedimientos especificados en el apéndice deberá
utilizar una pulsera antiestática. Para realizar cualquiera de los procedimientos
especificados en el apéndice, no olvide utilizar la pulsera electrostática que acompaña el
chasis para minimizar los efectos de las descargas de electricidad estática.
Note: Although the illustrations in this section show the 7G4285-49, all switch, DIMM,
and DRAM SIMM locations are the same on both DFE modules.