Enterasys Networks Enterasys Platinum Distributed Forwarding Engine 7G4285-49 - Manual (Page 82)

Gaining Access to Memory Modules
B-8 Mode Switch Settings and Option Installations
2. Remove the two screws fastening the network expansion module to the DFE module
front panel and remove the standoff fastening the network expansion module to the
main board. Save the two screws and standoff for later use to reinstall the network
expansion module.
3. Lift and remove the network expansion module off the two main PC board
connectors. Now you have access to the DRAM SIMM. To replace the DRAM SIMM,
proceed to “
Removing the DIMM” .