Last resort shutdown, Procedure using offline/reset switch – Enterasys Networks Enterasys Platinum Distributed Forwarding Engine 7G4285-49 User Manual
Page 70
Overview of DFE Module Shutdown Procedure
4-12 Troubleshooting
Last Resort Shutdown Procedure Using OFFLINE/RESET Switch
To reset a DFE module without it performing an orderly shutdown routine,
press and hold the OFFLINE/RESET switch for approximately 6 seconds.
Pulling any DFE module out of the chassis before it has been shut down is not
recommended. The only safe time to pull a module out of the chassis is after the
completion of a shutdown and the management LED is flashing amber/off.
Caution: This method of shutting down a DFE module is not recommended except as a
last resort, because all processes currently running on the module will be interrupted
resulting in loss of frames.
Precaución: No se recomienda utilizar este método para apagar los módulos DFE.
Recurra a él sólo como último recurso, puesto que interrumpe todos los procesos del
módulo en funcionamiento, lo que podría resultar pérdidas de frames.