Matrix dfe startup screen example (n7 chassis) -25, Figure 3‐12 – Enterasys Networks Enterasys Platinum Distributed Forwarding Engine 7G4285-49 User Manual
Page 57
Completing the Installation
DFE-Platinum Series Hardware Installation Guide 3-25
The module is now ready to be configured. For information about setting the IP address
and configuring Telnet settings for remote access to DFE management, refer to Chapter 3
in the Enterasys Matrix DFE‐Platinum Series Configuration Guide. The CLI commands
enable you to initially set up and perform more involved management configurations.
The Enterasys Matrix DFE‐Platinum Series Configuration Guide is available online at:
If you require assistance, contact Enterasys Networks using one of the methods described
in “
Figure 3-12 Matrix DFE Startup Screen Example (N7 Chassis)
login: admin
Password:
M A T R I X N7
Command Line Interface
Enterasys Networks, Inc.
50 Minuteman Rd.
Andover, MA 01810-1008 U.S.A.
Phone: +1 978 684 1000
E-mail: [email protected]
WWW: http://www.enterasys.com
(c) Copyright Enterasys Networks, Inc. 2003
Chassis Serial Number: xxxxxxxxxxxx
Chassis Firmware Revision: xx.xx.xx
Matrix N7(su)->