KEPCO RA 19-4C Operator Manual - Manual (Page 46)

2-28
RA 19-4C 121013
2.5.2.2 OPEN ON FAILURE USING EXTERNAL WIRING OF I/O MATING CONNECTOR
Figure 2-18 illustrates an open on failure alarm configuration using external wiring of the I/O
mating connectors for four power supplies. It is necessary to set DIP switch position 8 to OFF
(open) for each slot included in the open on failure alarm circuit.
FIGURE 2-18. OPEN ON FAILURE ALARM CONFIGURATION USING EXTERNAL WIRING
AT I/O MATING CONNECTOR, SIMPLIFIED DIAGRAM