KEPCO RA 19-4C Operator Manual - Manual (Page 22)

2-4
RA 19-4C 121013
FIGURE 2-2. CONTROLLING MULTIPLE POWER SUPPLIES, MULTIPLE LOADS
2.4.1.2 SENSE CONNECTIONS FOR INDEPENDENT OPERATION (HSF 300W AND 600W
MODULES ONLY)
The rack adapter is shipped from the factory with each power supply position configured for
local sensing (see Figure 2-3). Sensing for each slot can be configured independently:
• Local sensing using internal DIP switches
• Local sensing using external jumpers connected to the I/O mating connector or the DC
OUTPUT terminal block.
• Remote sensing
3. CONNECTIONS BETWEEN I/O CONNECTORS AND HSF POWER SUPPLIES ARE INTERNAL TO
RACK ADAPTER AND ARE SHOWN FOR REFERENCE ONLY.
4. SET POSITION 10 OF THE DIP SWITCH TO ON ONLY FOR HSF POWER
SUPPLIES WITH LOCAL/REMOTE SENSING CAPABILITY.
5. CAUTION: