KEPCO RA 19-4C Operator Manual - Manual (Page 13)

RA 19-4C 121013
1-5/(1-6 Blank)
Setback Ear Brackets, 19 inch Rack
(2 required)
128-2168
Used to mount rack adapter in 19-inch rack using “set back” position for
applications that require reduced depth protrusion (see Figure 1-6).
Ear Brackets, 23 inch Rack
(2 required)
128-1895
Used to mount rack adapter in 23-inch rack, front mount only. For “set
back” position for applications that require reduced depth protrusion con-
tact Kepco
Adapter Brackets, 24 inch Rack
(2 required)
108-0386
Used to mount rack adapter in 24-inch rack (EMCOR P/N ABA05)
Screws
((8 required, 4 for each ear bracket)
101-0446
Used to attach ear brackets to rack adapter chassis.(6-32 x 1/4, Flat
Head Phillips Tri-torq, Tubular Self Forming.
Connector, Euro-plug 142-0544 Mating connector for ALARM TB1-TB4 Euro-header.
Slide Kit (bottom mount) 219-0508
Allows rack adapter to slide out from the front. Requires additional 1U
(1.75 in.) minimum height)
Locking Bracket
See PAR. 2.8.3;
consult factory
Provides additional reinforcement for severe vibration or shock environ-
ments.
Support Bracket 128-1775
Pair required. Used to provide side support for rack adapter. Requires
rear rail at 18-13/16 in. setback.
TABLE 1-2. RA 19-4C ACCESSORIES (CONTINUED)
ACCESSORY PART NUMBER USE