KEPCO RA 19-4C Operator Manual - Manual (Page 11)

RA 19-4C 121013
1-3
1.4 MECHANICAL
The rack adapter is equipped with mounting ears for mounting in EIA-RS-310D standard 19-
inch racks. For mounting in non-standard racks, consult Kepco Applications Engineering. The
rack adapter is not configured for slides. Optional blank filler panels (see Table 1-2) are avail-
able if the full complement of power supplies is not utilized.
Mechanical dimensions, material, and finish of the RA 19-4C Rack Adapter are provided in Fig-
ure 1-6.
1.5 ACCESSORIES
Accessories for RA 19-4C Rack Adapters are listed in Table 1-2; see also Table 2-1 for addi-
tional accessories supplied with the unit.
1.6 OPTIONS
Table 1-1 describes the standard model options available with the RA 19-4C rack adapter. For
non-standard options, contact Kepco Applications Engineering for assistance.
FIGURE 1-4. RA 19-4C RACK ADAPTER REAR PANEL
DC OUTPUT
PS2
CABLE CLAMP*
DC OUTPUT
PS2
DC OUTPUT
PS3
DIP 4
CABLE CLAMP*
DC OUTPUT
PS4
DC OUTPUT
PS4
CABLE CLAMP*
DC OUTPUT
PS3
DIP 3
DC OUTPUT
PS1
CABLE CLAMP*
DC OUTPUT
PS1
DIP 2 DIP 1
PS2 KEYING PS3 KEYING 3042889
I/O CONNECTOR,
PS4
SOURCE POWER
INPUT FOR
PS2 AND PS4 I/O CONNECTOR,
PS3
* CABLE CLAMPS ARE USER
INSTALLED.
SOURCE POWER
INPUT FOR
PS1 AND PS3
I/O CONNECTOR,
PS1
CABLE CLAMP*
AC INPUT
PS1 AND PS3
PS4 KEYING
CABLE CLAMP*
AC INPUT
PS2 AND PS4
I/O CONNECTOR,
PS2 ALARM I/O
PS3
ALARM I/O
PS4
ALARM I/O
PS2
PS1 KEYING
ALARM I/O
PS1