Using wireless security options, Enabling wep encryption – Epson BrightLink 450Wi User Manual
Page 97
Using the Projector on a Network
97
Using Wireless Security Options
The projector includes WEP and WPA data encryption security
options which you can enable for network projection.
Make sure the settings you select match the ones used by your
network; follow the directions from your network administrator.
See the following sections to enable security options on your
projector:
■
“Enabling WEP Encryption” below
■
“Enabling WPA Security” on page 99
You also need to enable security settings from EasyMP Network
Projection (see page 100).
Enabling WEP Encryption
1. Press
Menu
on the projector remote. Highlight
Network
and
then press
Enter
.
2. Choose
Network Configuration
and press
Enter
.
3. Highlight
Security
, then press
Enter
. You see the following
screen:
4. Press
Enter
to select Security, then select
WEP
and press
Enter
.
Press
Esc
to return to the previous menu.
note
The authentication and
firewall features are only
effective when the access
point for the connection
destination supports the
same functions.