Configuring the projector – Epson BrightLink 450Wi User Manual
Page 94

94
Using the Projector on a Network
Configuring the Projector
1. Press the
Menu
button, then choose
Network
and press
Enter
.
2. Choose
Network Configuration
and press
Enter
.
3. Choose
Wireless LAN
and press
Enter
. You see this screen:
4. Make sure Wireless LAN Power is set to
On
. You can turn it off
to prevent unauthorized access.
5. Select one of the following connection modes:
■
Quick
mode lets you easily connect one computer to the
projector at a time. You can also select this setting when
you’re using the optional Epson Quick Wireless Connection
USB key.
■
Advanced mode lets multiple computers access the projector
at the same time and easily trade off control of the projector.
This method requires a wireless network access point or an
AirPort Extreme (or AirPort) base station.
6. If your network is using 802.11a, use the arrow buttons on the
remote control to highlight
802.11a
, then press
Enter
to select it.
Press
Esc
to return to the previous menu.