Epson BrightLink 450Wi - Manual (Page 37)

Connecting to Computers, USB Devices, and Other Equipment 37
Connecting a Document Camera or
Other USB Device
You can connect an interactive whiteboard, document camera, USB
thumb (flash memory) drive, USB hard drive, or multimedia storage
viewer, such as the Epson P-7000. You can use the projector’s
Slideshow function to display JPEG images or a presentation. See
page 66 for details.
Use the USB cable specified for your device.
1. Follow the instructions beginning on page 40 to turn on the
projector.
2. Connect the USB drive or the flat end of the USB cable to the
TypeA (flat) USB port on the projector, as shown.
3. Connect the other end of the cable to your camera or other
device, if necessary.
The indicator light on the projector turns orange and then green
when a USB device is connected.
4. If the projector is connected to a storage device (and not
connected to another image source), the Slideshow program
appears.
note
Use a cable less than 10 feet
(3 meters) long and connect
the camera or other device
directly to the projector.
Your projector may not
function correctly if you use
a longer cable or connect to
a USB hub.
If you connect a USB hard
drive, make sure you use the
AC adapter to power the
hard drive. Make sure the
file format is FAT 16/32.
Some USB hard drives may
not be supported.
Indicator light
Connecting the DC-06
document camera